Friday 5 January 2018

The Cold Gun And Chip Vac can be used to Simplify Plastics Machining

A plastics manufacturer who was needing some solutions for problem areas in their production processes. The company imports their machines from overseas and they are outfitted with a coolant based, quench system for the tooling. They were wanting to get away from using coolant as the parts were absorbing liquid, causing them to swell, not to mention the mess they were creating, requiring more time and labor to dry and clean the parts manually.
For the first application, replacing the messy misting system, Exair's Application Engineer recommended the customer use Exair's Cold Gun System, Model # 5215. The Cold Gun uses Vortex Tube technology to produce a cold air stream 50°F lower than the incoming compressed air supply temperature. For example, if your supply air was ambient 70°F, you would effectively see 20°F air at the exhaust. This clean, cold air stream can be easily directed to the needed area to prevent any warping or other damage related to heat, while also blowing away the machined fines.
Model # 5215 – includes the Cold Gun, Single Point Hose Kit, 3/8″ Cone Nozzle, 1-1/4″ Fan Nozzle and Filter Separator

The second part of the process involved the recovery of the plastic scrap and chips created during the machining process. Once again, EXAIR has the ideal solution with Exair Chip Vac, Industrial Vacuum. The Chip Vac creates a powerful vacuum, with no moving parts or motors to wear out, making them virtually maintenance free. The Chip Vac is designed to vacuum dry or wet chips and collect them in a standard, open-top steel drum. Systems are available in 5, 30, 55 or 110 gallon capacities.
From small area clean up to larger scale processes, the Chip Vac has you covered

To discuss how EXAIR products might help improve your machining process, kindly contact us.
Vivek Engineers#22, 1st Floor, 1st Cross, Adj. to IIMB Compound, Bilekahalli Indl. Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : sales@vivekengineers.net , durga@vivekengineers.net

CONTACT PERSON :
Mr. Durga Madhab Praharaj - Sales & Operations Manager
Mob : 097404 39220. E -mail : durga@vivekengineers.net