Monday 18 July 2016

EXAIR’s Super Air knife is an advanced generation tool used to blow off liquid or debris from products as they travel on conveyors. The knife consists of a high intensity, uniform sheet of laminar airflow sometimes known as streamline flow across the entire length with hard hitting force. An industrial Super Air knife is a pressurized air plenum containing a series of holes or continuous slots through which pressurized air exits in a laminar flow pattern. The exit air velocity then creates an impact air velocity onto the surface of whatever object the air is directed.


Super Air Knives are aerodynamically engineered and tested to produce an efficient, uniform and high velocity stream of air. Air Knives are designed for 24/7 use, have smooth edges and seams for easier cleaning, can be precisely adjusted without tools for faster change-over’s and are custom sized for your application. Super Air knife dramatically reduce compressed air and noise levels as compared to other blow-off products. The sound level is surprisingly quite at 69 dBA even at high pressure of 80 PSIG (5.5 BAR). It produces air amplification ratios (entrained air to compressed air) of 40:1.Meets OSHA maximum dead-ended pressure & noise requirements. .

Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : [email protected] 
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]

Friday 15 July 2016

E-Vac Vacuum Generators

EXAIR’s compressed air powered E-Vac is a low cost, compact alternative to traditional vacuum pumps in single stage designs. EXAIR's vacuum generators can be used to generate vacuum economically without a single moving part.

Patented design extracts maximum amount of energy from compressed air source while optimizing the level of vacuum generation. E-Vac is commonly used for pick & place operations and provides instantaneous response. Variety of sizes & flows along with a selection of suction cups for wide range of application are available with these single stage vacuum pumps.

The E-Vac vacuum generators have high efficiency & have been engineered to minimize air consumption. The fluctuations in vacuum are eliminated due to the EXAIR’s single stage design, providing consistent & steady vacuum. E-Vac has no moving parts to wear out & is completely maintenance free.
E-Vac Vacuum generator unit can be easily mounted close to the work surface eliminating line loss that occurs in long lengths of tubing. E-Vac increases cycle speed & eliminate the need for a larger vacuum generator. The use of vacuum cups assure fast attach & release times.
Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : [email protected] 
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]

Thursday 14 July 2016

Safety Air Guns use engineered air nozzles for high performance!

Inexpensive air guns are sold through many catalogs and industrial supply companies. Most have triggers or other parts that break quickly. The performance is similar to open pipe, where they simply blow a lot of compressed air. In addition to the high air consumption, many produce noise levels that violate OSHA requirements. Some even generate dangerous dead end pressures that can result in serious or fatal injuries if blocked.

EXAIR’s Safety Air Guns eliminate these problems. They are durable and comfortable to use. Each model uses an engineered Air Nozzle that provides superior performance by entraining large volumes of surrounding air. Safe operation is assured along with low air consumption and noise levels.


Selecting the Right Safety Air Gun

Four Safety Air Guns. The Soft Grip and Heavy Duty Safety Air Guns are available with a variety of air nozzles (listed in order of force). Those with stainless steel air nozzles provide higher mechanical wear while withstanding corrosion and high temperatures. Air consumption, force and sound level are shown for all models.




one of our customer was facing a problem of cooling their component soon as they heating their component through machine heating and they were looking for instant cooling solution for the same. we have furnished solution for the same, the customer was very much satisfied. The EXAIR Cold Gun 15scfm Part No. 5015 and Single Point hose kit Part No. 5901.
one of our customer was facing a problem of cooling their component soon as they  were heating the components through machine heating and they looking for instant cooling solution for the same. we have furnished solution for the same, the customer was very much satisfied. The EXAIR Cold Gun 15scfm Part No. 5015 and Single Point hose kit Part No. 5901.
 
Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : [email protected] 
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]

Wednesday 13 July 2016

 Cold Gun


EXAIR’s Cold Air Guns use filtered compressed air (80-100 PSIG) and vortex tube technology to produce sub-zero air for industrial spot cooling. Using only compressed air, the Air Gun produces a stream of cold air 50°F (28°C) below your compressed air Cold Guns keep parts cooltemperature @ 80 psi. It’s clean, convenient – put the gun where you need it, using the magnetic base – aim the cold air stream onto your work with the flexible hose – go to work!. To optimize the gun’s cooling capability the cold airflow & the temperature drop are factory set & is non-adjustable.


Cold air machining eliminates mist coolants and heat-related parts growth while improving tool life, parts tolerance and surface finish quality. Air Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. The unit is muffled for quiet operation. No moving parts assure long life, maintenance free operation while extending tool life and improving production rates.

Cold Air Guns are used in various industrial processes, fabrication, assembly and packaging as a versatile spot cooling device. Most popular applications involve cooling during the machining of metals, plastics, wood, rubber, ceramics and other materials.

Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : [email protected] 
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]

Monday 11 July 2016

Mini Cooler Intelligent Compressed Air ProductCool small parts and tools with clean, cold air.Prevent burning, melting or breakage.



EXAIR’s Mini cooler is a productive way to reduce downtime & increase generatively on a variety of operation involving small parts where heat is a problem. To prevent heat buildup EXAIR’s Mini cooler produces a stream of 20F (-7C) cold air. There are no moving parts to wear out & the operation is quite at 76 dBA.The effectiveness of the Mini Cooler is particularly on high speed operations to prevent burning, melting & heat related breakage. It is compact & low in cost.

Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area,
Bannerghatta Road, Bangalore - 560 076.
ph : 080- 2648 1309.
E- mail : [email protected]
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]

Friday 8 July 2016

NEMA 4 Cabinet Cooler systems

Cabinet Cooler systems are dust and oil tight, splash resistant and indoor/outdoor capable. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4 enclosure integrity.
Thermostat control systems (Models 4804-4880) are the most efficient system because it will turn itself on and off as needed to cool your enclosure. Includes cooler, solenoid valve and thermostat, filter separator and cold air distribution kit. Models are available in 110VAC, 240VAC and 24VDC.
Continuous operation systems (Models 4704-4780) include the cooler, a fi lter separator and cold air distribution kit.


ETC Thermostat control systems provide on the fl y temperature adjustment and an internal temperature feedback display.

High Temperature Cabinet Cooler systems should be used when ambient temperatures reach 125°F to 200°F (52°C to 93°C).

Non-Hazardous Purge (NHP) models provide a continuous positive purge within the enclosure to prevent contaminants from entering. They are suited for extremely dirty and dusty environments.


Dual Cabinet Cooler systems (Models (##50-##80) provide for additional cooling.

PL Nayak,
Vivek Engineers,
#22,1st. Floor,1st. Cross,
Bilekahalli Industrial Area,
Adj. IIMB Compound,
Bannerghatta Road,
Bangalore - 560 076.
Mobile : 97404 39220(Mr. Durga Madhab Praharaj - Sales & Opearations Manager.)
Ph : 080- 2648 1309
[email protected]

Thursday 7 July 2016

 Vortex Tube

Vortex Tubes are an effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. A Vortex Tube turns factory compressed air into two airstreams, one very cold and one hot, using no moving parts. Simple and low-cost, a Vortex Tube can produce:

•Cool product during ultrasonic welding Temperatures from -50°F (-46°C) to +260°F (+127°C).

• Refrigeration up to 10,200 BTU/H (2571 Kcal/H)

• Air flow rates from 1 to 150 SCFM.

A control valve located in the hot exhaust end can be used to adjust the temperature drop and rise over a wide range for all Vortex Tubes.

Tuesday 5 July 2016




Filter the chips out of your used coolant and cutting oils! 


Vacuums in the liquid with solids,pumps out only the luid!

The Exair's Chip Trapper (patent pending) offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids. 

The Chip Trapper uses EXAIR's compressed air powered Reversible Drum Vac (included) that can fill or empty a 55 gallon drum in less than two minutes. Simply set the Reversible Drum Vac pump and directional flow control valve on top of the drum to "fill" for it to quickly vacuum the liquid with solids. Once the sump, pit or tank is empty, set the pump and directional valve to "empty" for it to pump out clean coolant/liquid. All the chips and other solids are trapped inside the reusable filter bag of the Chip Trapper. More>>
Regards
Padmalochan Nayak
Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area,
Bannerghatta Road, Bangalore - 560 076.
Tel phone : 080- 2648 1309.
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : [email protected]