Thursday 26 March 2020

Line Vac Improves Pharmaceutical Application


A 316 Stainless Steel Line Vac is used by a pharmaceutical

company to convey pills and tablets to a packaging station.

Our standard stainless steel models (Type 303) offer good corrosion resistance and are ideal for food service, abrasive or corrosive applications. For critical applications including certain foods and pharmaceutical products, Type 316 stainless steel models provide excellent corrosion resistance.


For tablet transfers Line Vac of higher dia may be used

One Of Customer's Application:
This application is for a pressed powder tablet operation. The tablet press mold has a small hole in it which pulls a vacuum on the formed tablet to keep it in place and remove any leftover powder from the mold.
A vacuum generator that is used to hold the tablet in place had low vacuum flow and did not always remove the residual powder from the tablet press. This resulted in poor quality tablets with pitting on the tablets.
An EXAIR Line Vac model #6058, our smallest Line Vac product, used with 3/8? inside diameter hose provided a boost to the vacuum flow and recovered any residual powder from the tablet press. The powder moved easily through the Line Vac hose and dumped into the central vacuum recovery system. The quality issues were eliminated.





Vivek Engineers
#22, 1st Floor, 1st Cross, Adj. to IIMB Compound,
Bilekahalli Industrial Area, Bannerghatta Road,
Bangalore - 560 076.
Mob : 9740439220



Email : p.lochan@vivekengineers.net;                sales@vivekengineers.net

    






 


Monday 23 March 2020

Need Ultrasonic Leak Detector ! Because Leaks Won’t Find (Or Fix) Themselves


As margins get tighter and cost of manufacturing climbs, industries are looking into different areas to be more efficient.  A big focus nowadays is in their compressed air system.  Why is this?  Manufacturers are starting to realize that it takes an abundant amount of electricity to make compressed air.  That is why EXAIR manufactures compressed air products for optimization to get the best efficiency.  But what many manufacturers don’t realize is that quiet little hissing sound from there compressed air lines is costing them much money.   That is why EXAIR has the Ultrasonic Leak Detector.


When a leak occurs, it emits an ultrasonic noise.  The EXAIR Ultrasonic Leak Detector can pick this up.  It has a frequency range from 20 KHz to 100 KHz, above human hearing, so it can make the inaudible leaks, audible.  With three sensitivity ranges and LED display, you can find very minute leaks.  It comes with headphones and two attachments; the parabola attachment to find leaks up to 20 feet (6 meters) away, and the tube attachment for local proximity to define the exact location of the leak.

If you have any such type requirement at your work place, kindly contact us.

Vivek Engineers#22, 1st Floor, 1st Cross, Adj. to IIMB Compound, Bilekahalli Indl. Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 4170 1145
Mob : 097404 39220
E-mail:  p.lochan@vivekengineers.net,sales@vivekengineers.net , durga@vivekengineers.net

Tuesday 17 March 2020

EXAIR Has Your Cleanup Solution!






EXAIR Has Your Cleanup Solution!
The processes of manufacturing: milling, drilling, trimming, lubricating, washing, and cleaning, all create byproducts that must be quickly removed in order to maintain smooth production flow. EXAIR offers a full line of products that are specifically engineered to quickly and quietly vacuum a wide variety of material into standard drums for easy switch-out and storage.


With our Reversible Drum Vac System's compressed air powered vacuum, you can fill a 55 gallon drum in less than two minutes! Its two way pumping action empties and fills drums and sumps. 


Our High Lift Reversible Drum Vac's high powered vacuum is able to lift liquids up to 15 feet and fill a 55 gallon drum in less than 85 seconds. It has the extra power you need to move liquids from below grade work areas, sumps, or tanks.


EXAIR's compressed air operated Chip Vac is an industrial duty vacuum designed specifically for vacuuming chips. It creates a powerful direct flow action that vacuums metal, wood, or plastic chips into an ordinary drum.


The hardened, alloy construction of EXAIR's Heavy Duty Dry Vac resists wear from abrasive materials, and is designed for tough environments and heavy materials. It is ideal for fast and efficient cleaning of steel shot, garnet, metal chips, sand, and more!


Our Heavy Duty HEPA Vac has been engineered to filter contaminants to HEPA requirements in dusty environments requiring frequent cleaning. It is powerfully designed to move more material with less wear!


EXAIR's patented Chip Trapper offers a fast, easy way to clean chips, swarf, and shavings out of coolants and other liquids! It can be used to vacuum coolant or liquid that is filled with debris and trap all the solids in a reusable filter bag.



Using EXAIR's High Lift Chip Trapper, you can pump farther, pump higher, and pump thicker liquids. It vacuums coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out!


If you have any such type requirement at your work place, kindly contact us.

Vivek Engineers#22, 1st Floor, 1st Cross, Adj. to IIMB Compound, Bilekahalli Indl. Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 4170 1145
Mob : 097404 39220
E-mail:  p.lochan@vivekengineers.net,sales@vivekengineers.net , durga@vivekengineers.net