Thursday 17 May 2018

EXAIR Adjustable Spot Cooler for Cooling High Speed Rotary

Recently one of our customer was suffering from over-hitting of high speed rotary which affects in their production process. Having been wondering mind for a suitable and situational solution, they just contacted to our Vivekengineers office. As the problem was related to over hitting, so our first suggestion was towards our Exair Spot Cooling Products and after an in-depth case study analysis, we recommended for Adjustable Spot Cooler. According to the information provided by customer, the rotary rotates at 10000 RPM and by virtue of which it generates 45° C. Being recommended to use our Adjustable Spot Cooler of model 3825, they installed in their application area and achieved a temperature cool to 15-20° C with the rotary having 10000 RPM.

Adjustable Spot Cooler is a low cost, reliable and maintenance free Spot Cooler system which utilizes a vortex tube to produce cold air. Adjustable Spot Cooler temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements & application. The precise temperature setting ranges from approximately minus 30°F (-34°C) to room temperature and can be easily set with a thermometer.

Eventually, the customer is really satisfied with our product by experiencing an efficient and reliable productivity in friendly and safety environment.
If your industry is facing such type over heating problem and having a need for spot cooling products then kindly contact us in below provided contact details and we are having a wide variety of Spot Cooling Products such as Vortex Tube, Cold Gun, Mini Cooler and Cabinet Cooler for  panel cooling.
Vivek Engineers#22, 1st Floor, 1st Cross, Adj. to IIMB Compound, Bilekahalli Indl. Area, 
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  2648 1309, 4170 1145
E- mail ,

No comments:

Post a Comment