Tuesday 1 June 2021

EXAIR Digital Flow Meters

This blog is about the costs of compressed air and how to use it more efficiently. How can you determine the costs of your compressed air? The first step you’ll need to take is to put a number to how much compressed air you are currently using. In order to do that you’ll need a measurement tool such as the EXAIR Digital Flowmeter.

The Digital Flowmeter is available from stock for use on Schedule 40 pipe with sizes ranging from ½”-4” I.D. Sizes up to 8” for Schedule 40 and ¾”-4” for copper pipe are also available. Metric sizes are also available for 25mm, 40mm, 50mm, 63mm, 76mm, and 101mm. With a digital readout display, it’s easy to accurately monitor your compressed air usage throughout the facility. Creating a baseline of your usage will allow you to understand your compressed air demand, identify costly leaks, and replace inefficient air products.

The Digital Flowmeter installs in minutes with help from a drill guide and locating fixture to assist in mounting the Digital Flowmeter to the pipe. Two flow sensing probes are inserted into the drilled holes in the pipe. The meter then seals to the pipe once tightened. There is no need to cut, weld, or do any calibration once it is installed. With blocking rings also available, installation can be permanent or temporary. Below is a easy to follow video on how to install EXAIR’s Digital Flow Meter!


The newest addition to this product line is the Digital Flowmeter with wireless capability. Using a ZigBee® mesh network protocol, data is transmitted to an Ethernet connected gateway. This allows you to mount the Digital Flowmeter in areas that you may not be able to easily access and wirelessly monitor and graph the usage with the EXAIR Logger software. 


Wireless output gives you the freedom to track air usage data from any computer!

In addition to communicating wirelessly with the gateway, the Digital Flowmeters can “piggyback” off of each other to extend their range. Each meter has a range of 100’. Using multiple Digital Flowmeters within the same ZigBee® mesh network, data can be passed from meter to meter to extend the distance over which the meters can operate. These can be installed on each major leg of your compressed air system to continuously monitor usage throughout the facility.

If you’d rather go with a hard-wired data collection method, the Digital Flowmeter is also available with a USB Data Logger. Simply remove the Data Logger from the Digital Flowmeter and connect it to the USB port of your computer. The data can then be viewed directly in the accompanying software or exported into Microsoft Excel.


Add a Data Logger for easy Value Tracking
Two special flow meter options we now offer are the Pressure Sensing Digital Flowmeters, and the Hot Tap Digital Flowmeters!

Pressure Sensing Digital Flowmeters help by generating a pressure and consumption profile of a system can help to pinpoint energy wasters such as timer-based drains that are dumping every hour versus level based drains that only open when needed. Hot Tap Digital Flowmeters offer a way to install a flow meter on a pipe that is currently under pressure. It uses a series of valves and mufflers to maintain a safe working environment for the installer.

Vivek Engineers
#22, 1st Floor, 1st Cross, Adj. to IIMB Compound, Bilekahalli Indl. Area, 
Bannerghatta Road, Bangalore - 560 076 
Ph : 080 -  2648 1309, 4170 1145.
Mob : 097404 39220






    

No comments:

Post a Comment