Cabinet Coolers

EXAIR’s cabinet coolers for control panels are UL Component Recognized and provide a low cost method of both purging and cooling electrical and electronic control panels. There are virtually no moving parts. These units are compact and can be installed in minutes through a standard electrical knockout. These units are available for NEMA Type 12, NEMA Type 4-4X rated panels. These user friendly air conditioning systems provide maintenance free cooling for a lifetime of protection without wearing out.

The cabinet cooler uses a stainless steel vortex tube to create cold air from ordinary compressed air.There are Three (3) Types to choose from:

1. Cabinet Panel Coolers NEMA Type 12 For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

2. Panel Coolers NEMA Type 4-4X For Electronic Control Panels - splash resistant, for use in wash down environments as well as outdoor use. Unique patent pending design for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. For more Details>>  

www.vivekengineers.net

Heat Can Stop Your Machines

When hot weather causes the electronics inside a control cabinet to fail,there is a panic to get the machinery up and running again. There are several cooling options out there and it’s important to know the facts.

www.vivekengineers.net

Super Air Knife for Blowing And Cleaning

Exair’s Compressed Air products   provide solution for Industrial Automation  for various applications in small  and big factories. One of our customers uses  the 18” super Air knife for  blowing and cleaning  water and dust particles from fruits. 

They had a serious problem relating to their fruit drying and cleaning purpose. So they contacted us. Our application engineer visited their site and determine a solution  to their problem .  Earlier they were doing this work by  the electric fans ,but it was time taking and not so effective as they couldn’t clean the dust properly. As per his consideration we provided them a 18” Super Air knife. Now they are satisfied by using EXAIR’s Super Air Knife.

www.vivekengineers.net

What You Don't Know Can Kill You!

Did you know that it's dangerous to block a typical commercial nozzle with your hand or other body part? According to the Occupational Safety and Health Administration (OSHA), any air hose, open pipe, or tube with an outlet pressure greater than 30 PSIG could potentially injure or even kill someone who blocks the opening with a body part (OSHA CFR 1910.242(b)). The dead-ended pressure buildup could force air bubbles into a worker's bloodstream and block critical blood flow. EXAIR's engineered Air Nozzles are designed to prevent dead-ending at any pressure. >> Tell Me More

Are You Blowing Away Money With Your Current Blowoff Operation?

Many commercial nozzles ignore efficiency in order to try and create additional blowoff force. While this may be useful in the short term, it can ending up costing you a lot of money over the life of that nozzle! For example, a typical 1/8" open pipe blowoff at 80 PSIG will use 70 SCFM of air. EXAIR's equivalent 1/8 NPT Model 1102 Mini Super Air Nozzle will use 10 SCFM at 80 PSIG. In other words, after using EXAIR's engineered nozzle over one year of a 40 hour/week operation, you could save about Rs 1,26,000.00 in compressed air production and that's just by replacing one nozzle! >> Tell Me More

In addition, the reduced air use of an EXAIR engineered nozzle also means that less noise is produced. When a blowoff operation is upgraded with an EXAIR Air Nozzle, noise is reduced by 10 dBA on average! >> Tell Me More

www.vivekengineers.net

E-Vac Vacuum Generators

E-Vac Vacuum Generators

EXAIR’s compressed air powered E-Vac is a low cost, compact alternative to traditional vacuum pumps in single stage designs. EXAIR's vacuum generators can be used to generate vacuum economically without a single moving part.

Patented design extracts maximum amount of energy from compressed air source while optimizing the level of vacuum generation. E-Vac is commonly used for pick & place operations and provides instantaneous response. Variety of sizes & flows along with a selection of suction cups for wide range of application are available with these single stage vacuum pumps.

The E-Vac vacuum generators have high efficiency & have been engineered to minimize air consumption. The fluctuations in vacuum are eliminated due to the EXAIR’s single stage design, providing consistent & steady vacuum. E-Vac has no moving parts to wear out & is completely maintenance free.More details>>

www.vivekengineers.net

Safety Air Guns with Chip Shields Protect Operators

           EXAIR’s family of Safety Air Guns (Precision Safety Air Gun, Soft Grip Safety Air Gun, and Heavy Duty Safety Air Gun) has always provided high quality performance for your blowoff, drying or cleaning needs. Now, they are available with Chip Shields to protect workers and to help businesses comply with OSHA safety standards. Chip Shields can be used on Safety Air Guns with or without an extension pipe.

            Chip Shields are a durable polycarbonate shield that protects operators from flying debris often associated with blowing chips off machined parts. Chip Shields are great for keeping coolant from splashing everywhere during drying operations.Chip Shields are available to fit the Safety Air Guns you currently have in use.

         EXAIR’s Safety Air Guns use engineered air nozzles for high performance and safety – designed to maximize entrainment of room air while minimizing compressed air consumption. The Precision Safety Air Gun is extremely lightweight and the most comfortable to operate during periods of extended use. The Heavy Duty and Soft Grip Safety Air Guns have a durable cast aluminum body for rugged industrial use. All are available with extension pipes and Chip Shields

www.vivekengineers.net

Siphon Fed Spray Nozzles for Non- Pressurized Applications

EXAIR's new siphon fed spray nozzles atomize fluids in a range of spray patterns for a wide variety of uses. Siphon fed atomizing nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm). They combine liquid and compressed air to create a thin coating of liquid that can be easily adjusted to meet the needs of your application.

With EXAIR’s siphon fed atomizing nozzles, you can coat, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 centipoise. Used with water, atomizing nozzles are an efficient way to evenly cool hot items in your automated process.

The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are available in a variety of flow patterns and rates to meet your needs. Internal mix and external mix atomizing nozzles are also available. All models are adjustable.

Contact Vivek Engineers for more information. 

VIVEK ENGINEERS  
sales@vivekengineers.net
www.vivekengineers.net