Gen4 Ion Air Cannon is ideal for a concentrated flow of Ionized Air

 
The static eliminating, Gen4 Ion Air Cannon is ideal for those applications where you need a concentrated flow of Ionized Air to remove static and dust. The Gen4 Ion Air Cannon will entrain a large amount of ambient air, and with the ion emitter point place in the air flow, it can produce static eliminating effectiveness up to 15 feet away. This is perfect for those confined areas that need a concentrated flow of static eliminating ions. These can be operated with a compressed air supply as low as 10 PSIG.

Click here to read more>>>>>

Padmalochan Nayak Vivek Engineers #22, 1st Floor, 1st Cross,  Bilekahalli Indl. Area, Adj. IIMB Compound,  Bannerghatta Road, Bangalore - 560 076  Ph : 080 -  2648 1309, 4170 1145. Email: p.lochan@vivekengineers.net

Exair Adjustable Spot Cooler cools scientific instruments during manufacturing!

If we compare the melting point of plastic and stainless steel, then up course plastic has low melting point as compared to stainless steel which is a scientific truth. 

So at manufacturing industries it would be a tough situation during assembling a stainless steel parts and plastic parts. To speed up the manufacturing process, the manufacturer will have a big headache, how to cool down the stainless steel parts before assembling with any plastic parts.

A scientific instruments manufacturer has the same heat problem during assembling a stainless steel tube and plastic parts. The tube end is flared using heat, then flared end must be cooled quickly to avoid melting the plastic parts. Our principal Exair-USA suggested them the Model 3825 Adjustable Spot Cooler which has provided the solution.

Now I would like to discuss about Exair Adjustable Spot Cooler .

Exair Adjustable Spot Cooler is a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select the temperature best suited to your application.

The Adjustable Spot Cooler provides a precise temperature setting from -30°F (-34°C) to room temperature.
The Adjustable Spot Cooler incorporates a vortex tube that converts an ordinary supply of compressed air into cold air.
• It can produce temperatures from -30° to +70°F (-34° to +21°C)
• Parts included for fl ow rates of 15, 25, and 30 SCFM (425, 708 and 850 SLPM). 25 SCFM (708 SLPM) generator is factory installed.
• It can produce refrigeration up to 2,000 Btu/hr. (504 Kcal/hr.)
A swivel magnetic base provides easy mounting and portability. Flexible tubing that holds its position directs the cold air. No moving parts or CFC’s assures maintenance free operation.

Click here to read more>>>>>

Posted by Padmalochan Nayak Vivek Engineers #22, 1st Floor, 1st Cross,  Bilekahalli Indl. Area, Adj. IIMB Compound,  Bannerghatta Road, Bangalore - 560 076  Ph : 080 -  2648 1309, 4170 1145. Email: p.lochan@vivekengineers.net

Say Goodbye To Static Charge!

Finding the Perfect Static Eliminator

Static Eliminators are engineered to deliver a constant stream of static eliminating ions to prevent product damage on production lines as well as harmful shocks to employees. But even with the common goal of eliminating static, individual workplaces and processes inevitably will require different approaches for their solutions.

EXAIR has worked over the years to develop a selection of products to provide solutions with this very thought in mind.

For processes that require flexibility and movement, we have Portable Static Eliminators i.e. 1. Intellistat® Ion Air Gun 2. Gen4® Ion Air Gun™ 3. Gen4® Ion Air Cannon™ perfect for blowing off trimmings, dust or particulate in hard-to-reach areas or on complex shapes. For processes requiring large areas of coverage or consistent streams of static eliminating ions on rapid production lines that might experience jamming or tearing, take a look at our Fixed Static Eliminators. 1. Gen4® Super Ion Air Knife™ 2. Gen4® Super Ion Air Wipe™ 3. Gen4® Ion Air Cannon™ 4. Gen4® Ion Air Jet™ For processes that may be sensitive to airflow, we have a line of Static Eliminators Without Air that provide concentrated ions up close to the process with exceptional static decay rates. 1. Gen4® Ionizing Bar 2. Gen4® Ionizing Point™ No matter the process, Vivek Engineers is always dedicated to working with our customers to find their perfect solution. For advice on a particular problem or inquiries on how an EXAIR product can improve your process, feel free to email our application engineers at sales@vivekengineers.net. To learn more about our products, follow the link below to visit our site. website: www.vivekengineers.net Posted by Padmalochan Nayak Vivek Engineers #22, 1st Floor, 1st Cross,  Bilekahalli Indl. Area, Adj. IIMB Compound,  Bannerghatta Road, Bangalore - 560 076  Ph : 080 -  2648 1309, 4170 1145. Email: p.lochan@vivekengineers.net