E-Vac Vacuum Generators

E-Vac Vacuum Generators

EXAIR’s compressed air powered E-Vac is a low cost, compact alternative to traditional vacuum pumps in single stage designs. EXAIR's vacuum generators can be used to generate vacuum economically without a single moving part.

Patented design extracts maximum amount of energy from compressed air source while optimizing the level of vacuum generation. E-Vac is commonly used for pick & place operations and provides instantaneous response. Variety of sizes & flows along with a selection of suction cups for wide range of application are available with these single stage vacuum pumps.

The E-Vac vacuum generators have high efficiency & have been engineered to minimize air consumption. The fluctuations in vacuum are eliminated due to the EXAIR’s single stage design, providing consistent & steady vacuum. E-Vac has no moving parts to wear out & is completely maintenance free.More details>>

www.vivekengineers.net

Safety Air Guns with Chip Shields Protect Operators

           EXAIR’s family of Safety Air Guns (Precision Safety Air Gun, Soft Grip Safety Air Gun, and Heavy Duty Safety Air Gun) has always provided high quality performance for your blowoff, drying or cleaning needs. Now, they are available with Chip Shields to protect workers and to help businesses comply with OSHA safety standards. Chip Shields can be used on Safety Air Guns with or without an extension pipe.

            Chip Shields are a durable polycarbonate shield that protects operators from flying debris often associated with blowing chips off machined parts. Chip Shields are great for keeping coolant from splashing everywhere during drying operations.Chip Shields are available to fit the Safety Air Guns you currently have in use.

         EXAIR’s Safety Air Guns use engineered air nozzles for high performance and safety – designed to maximize entrainment of room air while minimizing compressed air consumption. The Precision Safety Air Gun is extremely lightweight and the most comfortable to operate during periods of extended use. The Heavy Duty and Soft Grip Safety Air Guns have a durable cast aluminum body for rugged industrial use. All are available with extension pipes and Chip Shields

www.vivekengineers.net

Siphon Fed Spray Nozzles for Non- Pressurized Applications

EXAIR's new siphon fed spray nozzles atomize fluids in a range of spray patterns for a wide variety of uses. Siphon fed atomizing nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm). They combine liquid and compressed air to create a thin coating of liquid that can be easily adjusted to meet the needs of your application.

With EXAIR’s siphon fed atomizing nozzles, you can coat, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 centipoise. Used with water, atomizing nozzles are an efficient way to evenly cool hot items in your automated process.

The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are available in a variety of flow patterns and rates to meet your needs. Internal mix and external mix atomizing nozzles are also available. All models are adjustable.

Contact Vivek Engineers for more information. 

VIVEK ENGINEERS  
sales@vivekengineers.net
www.vivekengineers.net

Standard Air Wipe

This hard-hitting 360° ring of airflow is the economical way to blowoff, dry, clean and cool.

EXAIR’s Standard Air Wipe provides a uniform 360° airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire and more. The split design offers easy clamping around the surface of the material moving through it, eliminating the need for threading. All models include painted screws and plastic shims. Reinforced rubber hose is also included on sizes up to 4" (102mm) for added corrosion and heat resistance. Standard Air Wipe models are rated for temperatures up to 150°F (66°C) .

 

 The Standard Air Wipe is an economic choice when the added properties of stainless steel are not required. The Standard Air Wipe is generally suited to non-corrosive applications where temperatures do not exceed 150°F (66°C).The Standard Air Wipe includes painted screws, plastic shims & a general purpose PVC coupling air hose on sizes up to 4”(102 mm).It meets OSHA maximum dead end pressure & noise requirements.
 

Contact Vivek Engineers for more information.

VIVEK ENGINEERS 
sales@vivekengineers.net
www.vivekengineers.net

Full-Flow Air Knife

EXAIR’s Full-Flow Air Knife is a cheapest & energy competent way to clean, dry or cool parts, webs or conveyors. Full-Flow Air knives operate by entraining the surrounding air along with the compressed air utilizing the “Coanda” effect to produce high flow, high velocity curtain of air. Air Knives are designed for 24/7 use, have smooth edges and shims for easier cleaning, can be precisely adjusted without tools for faster change-over’s and are custom sized for your application. The Full-Flow feature provides air flow across the entire length. The Full-Flow Air Knife has the compressed air inlet on the rear. It is available in either aluminium or stainless steel construction.

Shim Sets 

A Full-Flow Air Knife has a .002" (.05mm) gap setting. This gap is set with a shim positioned between the cap and the body of the Full-Flow Air Knife. Force and flow through the Full-Flow Air Knife may be easily increased by adding shims to open the gap. Kits include a shim set. Shim sets for aluminum Full-Flow Air Knives include a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim. Shim sets for stainless steel Air Full-Flow Knives include (1) .002" (0.05mm) thick stainless steel shim.

Contact Vivek Engineers for more information.

VIVEK ENGINEERS 

sales@vivekengineers.net
www.vivekengineers.net

CE Compliant Air Amplifier

EXAIR’s Super Air Amplifiers and Adjustable Air Amplifiers have always provided a fast, quiet, efficient way to move large volumes of air for the transport of smoke, fumes, or light materials as well as for venting, cooling, drying and cleaning. Now, independent laboratory tests certify that EXAIR’s Air Amplifiers meet the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark.

Using no electricity or moving parts, EXAIR’s Air Amplifiers are able to transform a small amount ofcompressed air into a high volume, high velocity output that is up to 25 times their consumption rate.  The patented design maintains a constant, high velocity outlet flow across the entire cross sectional area. Output is easily adjusted and both the vacuum and discharge ends can be ducted. Air Amplifiers are available in stock in both aluminum and corrosion resistant stainless steel. 

Contact Vivek Engineers for more information.

VIVEK ENGINEERS 

sales@vivekengineers.net
www.vivekengineers.net

CE Compliant Control Minimizes Compressed Air Use

EXAIR’s digital ETC (Electronic Temperature Control) Cabinet Cooler System keeps electrical enclosures cool while minimizing compressed air use. Independent laboratory tests now certify that the ETC™ is CE compliant to assure safe operation in a wide range of cooling applications, allowing it to work perfectly with our CE compliant Cabinet Cooler units.

The ETC accurately maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics. It permits just enough cooling for the electronics without going so cold as to waste compressed air. A digital LED readout displays the temperature of the electrical enclosure (°F or °C), then displays the user temperature setting when pressing the “push to set” button. When that setting is exceeded, the Cabinet Cooler System is activated which circulates 20°F air throughout the electrical enclosure to prevent a high temperature malfunction.

The ETC is suitable for NEMA 4, 4X and 12 environments with a strong polycarbonate plastic housing and sealed membrane push button control. All systems include an automatic drain filter separator to keep moisture in the compressed air out of the electrical enclosure. Models for 120 VAC or 240 VAC are available with cooling capacities up to 2800 Btu/hr. Applications include cooling programmable controllers, CNC panels, computer cabinets, and variable speed drives.

Vivek Engineers

Website : www.vivekengineers.net
Follow us: twitter.com/vivekengineers