Wednesday 6 April 2016

Super Air Knife Fits Like A Glove


Super Air Knives in blow off application
Super Air Knives in blow off application
Our Air Knives (all styles – SuperStandard, and Full Flow) have long-been a go-to favorite for blow off applications.  The concentrated, laminar airflow provides a powerful blow off with minimal compressed air use.  And, our knives are quiet, easy to install, and ready to ship from stock.
Notice the cutout on the plexiglass and conveyor rails for the Super Air Knives
Notice the cutout on the plexiglass and conveyor rails for the Super Air Knives

Product moving through the blow off area
Product moving through the blow off area
So, when a customer sent me the photos above showing our 12” Aluminum Super Air Knife (model110012) performing a blow off function in their application, it was a “normal” sight to see.  But, the way these knives are integrated into the application is a little different than most apps.  Usually the knives are installed in a similar fashion, but without an enclosed blow off area, and without the specially machined cutouts to accommodate the installation angle of the knives.
These specifics are great to see, albeit that there may be some lower level of entrainment with this setup.  Nevertheless, even at possible non-optimal performance, these knives are performing flawlessly.  The only need from the end user was to get more knives for a new conveyor line.
Custom setup isn’t a requirement for our products; in fact, most applications require little specialized installation.  And, to assist with getting our Air Knives articulated to the exact location necessary, we have our Universal Air Knife Mounting System.  The Universal Air Knife Mounting System will allow installation at any angle at extensions up to 30″.
If you have an application you’d like to discuss, whether a custom setup or using off-the-shelf products, we’re always here to help.
Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area,
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : sales@vivekengineers.net
URL : www.vivekengineers.net
CONTACT PERSONS :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : durga@vivekengineers.net

No comments:

Post a Comment