Super Air Wipe

A Model 2404 4" (102mm) Super Air Wipe cleans a steel rod after processing	The Super Air Wipe eliminates the possibility of smoke during machining by wiping hydraulic oil from the bar stock as it enters the chuck

Blowoff, dry, clean and cool pipe, cable, extruded shapes, hose, and wire!

Split design requires no threading!

EXAIR’s Air Wipe produces a “laminar” flow of air along its 360° angle using the “Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air. It is easy to mount and the split design provide easy clamping around the surface of the material ,eliminating the need for threading .EXAIR Air wipe reduces both compressed air consumption and noise levels.

It produces an output flow up to 30 times. All Super Air Wipe models include stainless steel screws & shims. For added corrosion & heat resistance braided hose is also included on sizes up to 4” (102mm).For Aluminum models the temperature rating is up to 400°F (204°C) & stainless steel models for temperature up to 800°F(427°C).

Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area,
Bannerghatta Road, Bangalore - 560 076.

Ph : 080 -  3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail : sales@vivekengineers.net
URL : www.vivekengineers.net

CONTACT PERSONS :

Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail : durga@vivekengineers.net