Monday 23 May 2016

Super Ion Air Wipe

Super Ion Air Wipe

Super Ion Air Wipe

Ring of ionized airflow clamps around the part!

Neutralizes and cleans continuous moving surfaces!

Super Ion Air Wipe split design

What Is the Super Ion Air Wipe?

EXAIR's new Super Ion Air Wipe provides a uniform 360° ionized airstream that is easy to clamp around a part for eliminating static electricity and contaminants. It is ideal for use on pipe, cable, extruded shapes, hose, wire and more. It maximizes ionized airflow while minimizing compressed air consumption.

The split design unlatches easily to fit around
the moving part - no threading required.

Super Ion Air Wipe Sizes
The Super Ion Air Wipe is available in a 2"
(51mm) and 4" (102mm) diameter.

Why The Super Ion Air Wipe?

The Super Ion Air Wipe provides total coverage of the part moving through it. The high volume, high velocity flow attaches itself to the surface and wipes it down with the static eliminating ions. The airflow stays attached to the surface and is effective for many feet away from where the Super Ion Air Wipe is mounted. An optional pressure regulator provides infinite control of the air volume and velocity. Increasing the pressure increases the forceful wiping action. Lower pressures provide excellent coverage with much lower force and velocity.
To this point, there has been no easy way to provide uniform coverage around a continuously moving part. It would have been too difficult to line up and feed continuously moving materials (such as wire, tubing or extrusions) through a solid ring. Arranging a series of ionizers around the surface would provide uneven airflow and prove to be costly. The split design of the Super Ion Air Wipe solves that problem by making it easy to clamp around the surface of the material moving through it, eliminating the need for threading or several ionizers.
The Super Ion Air Wipe is lightweight and easy to mount using the tapped holes on the back. It can also be held in place with rigid pipe. Coupling brackets that hold each half of the Super Ion Air Wipe together are provided which can be installed or removed quickly if required.


  • Clean and neutralize extrusions
  • Neutralizing pipe, tubing, wire
  • Cleaning molded parts
  • Neutralizing static for quality printing
  • Pre-paint dust removal
  • Remove chips, shavings
    and sawdust
  • Container neutralization


  • Low air consumption
  • Rapid static decay
  • Quiet
  • Non-contact
  • Effective up to 15 feet (4.6m)
  • Shockless, non-radioactive
  • Compact, rugged, easy to install
  • No moving parts-Low maintenance
  • Variable force and flow

Contact Us

Head Office :

Vivek Engineers,
#22, 1st. Floor, 1st. Cross,
Adj. IIMB Compound, Bilekahalli Industrial Area,
Bannerghatta Road, Bangalore - 560 076.
Ph : 080 -  3297 0358, 4170 1145
TeleFax : 080- 2648 1309.
E- mail :
Mr. Durga Madhab Praharaj - Sales & Opearations Manager.
Mob : 097404 39220. E -mail :

No comments:

Post a Comment